Forklift checking for wear
Time: 2019-07-04 Click: 119
I. Dongguan forklift inspection for wear
1. First look at the color and quality of the forklift oil, whether there are iron filings on the surface, and the viscosity of the oil. For example, there are many iron filings in the forklift oil, which means that the crankshaft bushes or connecting rod bushes need to be ground, and even the crankshaft is worn. If the machine is very viscous, the oil has not been changed for a long time.
2. When disassembling the crankshaft of the connecting rod piston, check the condition of the connecting rod bush and the crankshaft bushing. If it is found that the entire connecting rod that has been ground can no longer be used, assuming that the crankshaft has not been seriously ground, it can be processed after grinding use.
3. Query the wear status of the cylinder liner, and pay attention not to hit the engine body when disassembling the cylinder liner to avoid damage.
Forklift inspection is very important for forklift maintenance!
When does the forklift need to be checked?
After a long-term use of the forklift, the fatigue of the forklift and the wear of the forklift will occur. A good inspection can ensure that the forklift will not malfunction and wear seriously when it is used next time.
So when do you need to check?
My suggestion is that before the forklift is used and after the forklift is used, strict inspection can effectively ensure that the forklift can be used normally.
3. Who should do the forklift inspection?
The general suggestion is to be done by the driver or maintenance personnel. Of course, these are technical inspections. Forklift managers also need to make inspections a regulation to make inspections a habit. This is very important.
Related reading: Inspection steps for forklift light failure